1. What Is Solar? A Starter Guide
Start here if you know nothing about solar. That's totally okay!
The big idea
The sun sends out lots of light. Solar panels catch that light. They turn it into electricity. Electricity is the energy that runs your lights, fridge and phone charger.
That's really it. Sunlight goes in. Electricity comes out.
What is a solar panel?
A solar panel is a flat, dark rectangle. It usually has glass on top. Under the glass are many small squares called solar cells.
Here is how a cell works. Light hits the cell. The light gives tiny bits inside the cell a push. Those tiny bits are called electrons. When electrons move along a wire, that moving flow is electricity.
- More sun means more electricity.
- Clouds or shade mean less.
- At night, a panel makes none.
How do we measure electricity?
You will see the word watt a lot. A watt measures power. Power is how fast energy is made or used.
Think of water in cups. A bigger number means more cups at once.
- A phone charger uses a few watts.
- A microwave uses many more.
- A panel's watt number tells how much it can make in strong sun.
A kilowatt is 1,000 watts. A kilowatt-hour means using 1,000 watts for one hour. Your power bill counts kilowatt-hours. It shows how much electricity you used over time.
The parts of a solar system
A solar setup is like a team. Each part has one job.
| Part | Its job |
|---|---|
| Solar panel | Catches sunlight and makes electricity. |
| Inverter | Changes the panel's electricity into the kind your home uses. Panels make one kind. Outlets use another kind. The inverter is the translator. |
| Battery | Saves electricity for later. That could be at night, or when the power goes out. |
| Wires and plugs | Carry the electricity where it needs to go. |
| Mounts | Brackets and stands that hold the panels in place. |
What is "the grid"?
The grid is the big web of power lines. It brings electricity from the power company to your home. When you flip a switch, power usually comes from the grid.
Some solar works with the grid. It helps your home take less power from the power company. That can lower your bill.
Some solar works without the grid. That is called off-grid. It runs things on its own, like a camping light or a shed.
What happens when the power goes out?
This surprises a lot of people.
Most solar hooked to a home turns off when the grid goes down. That is a safety rule. It keeps workers safe while they fix the lines.
Want power in a blackout? You usually need a battery. You also need parts made to work that way. People call this storage.
Different sizes of solar
Solar comes in many sizes. Here they are, from small to big:
- Portable solar: a small folding panel and a battery box. Good for phones, lights and camping.
- Plug-in solar kit: one or two panels. They plug into a normal outlet at home. They help your bill a little.
- DIY solar kit: a bigger set you put together yourself. It takes more work, like mounting and wiring.
- Full home system: many panels, often on the roof. It may have a battery. Trained installers usually put it in, with permits. A permit is your city's OK for a project.
Not sure where you fit? Read DIY Kit vs. Plug-In Kit next.
Words to know
- Electricity: Energy that flows through wires and runs your things.
- Solar cell: A small square in a panel that turns light into electricity.
- Watt: A measure of power.
- Kilowatt-hour (kWh): Using 1,000 watts for one hour. Power bills count these.
- Inverter: The part that changes panel power into home power.
- Off-grid: Not hooked to power lines at all.
Questions to ask yourself
- Do I own my home, or rent it?
- Do I have a sunny spot without much shade?
- Do I want a lower bill, power in a blackout, or just to charge small things?
- How much of the work do I want to do myself?
Before you start anything
- Check the rules. Solar rules are different in each place. They also change. Check with your city, your state and your power company.
- Renters: Ask your landlord first.
- HOA: An HOA is a neighborhood group with its own rules. If you have one, check its rules.
- Look for safety labels. Safe products get tested by a safety lab. Look for marks like UL or ETL. They mean an outside lab checked the product.
Sources we read
We read these to check our facts. The words above are our own.
The technical version
Solar panels are photovoltaic (PV) devices. Here is what is going on underneath the simple version.
The photovoltaic effect
Most panels use crystalline silicon cells. Each cell is a p-n junction: one layer is doped to have extra electrons (n-type), the other to have "holes" (p-type). Where they meet, a built-in electric field forms. A photon with more energy than silicon's bandgap (about 1.1 eV) can knock an electron loose, creating an electron-hole pair. The junction's field pushes the electron and hole in opposite directions, and that separation drives current through an outside circuit.
One silicon cell makes only about 0.5 to 0.7 V, so a module wires dozens of cells in series to reach a useful voltage. Light that is too low in energy passes through or turns into heat, and extra energy above the bandgap is also lost as heat. That is a big reason why single-junction silicon has a theoretical ceiling (the Shockley-Queisser limit, roughly 33%) and why real modules sit near the low 20s in percent.
Power and energy
- Power P = V × I (watts = volts × amps). It is a rate.
- Energy = power × time. 1 kWh is 1,000 W for one hour. Your bill charges for kWh.
- A panel's nameplate watts (for example 400 W) are measured at Standard Test Conditions (STC): 1,000 W/m² of sunlight, 25 °C cell temperature, AM1.5 spectrum. Real rooftops usually make less than nameplate most of the time.
The system, part by part
- Modules make DC power.
- Inverter turns DC into AC at grid voltage and frequency (60 Hz in the U.S.). It also runs maximum power point tracking (MPPT): it keeps adjusting the voltage so the array runs where V × I is greatest.
- String inverters take many modules in series. Microinverters sit under each module. Optimizers are DC-to-DC converters per module that feed a string inverter.
- Racking, wiring, disconnects and overcurrent protection follow the National Electrical Code (NEC), mainly Article 690 for PV. NEC 690.12 requires rapid shutdown for PV on buildings so firefighters can de-energize rooftop conductors.
- Meter: a utility meter that can count power flowing both ways.
Why grid-tied solar shuts off in a blackout
Grid-tied inverters are certified to UL 1741 and follow IEEE 1547. One required feature is anti-islanding: if the grid voltage or frequency disappears, the inverter must stop exporting within a short time. That protects line workers who may be fixing "dead" lines. Running through an outage needs a battery or other source plus equipment that isolates the home from the grid first.
Scale
The same physics works from a 100 W portable panel to a utility plant. What changes is the voltage, the equipment, the code rules and the permits.